er, code. This
time on a scary
at a local shop.
2. Looks like we have ourselves a LaGard swing
boltlock. Nearly all of them are spikable when
functional, so let’s give it a shot!
3. First thing we have to do is remove the keypad,
taking care not to damage the cable coming from
the lock out the spindle hole. We then strip back the
ground (black) wire and tape the cable to the door.
4. With the cable pulled tightly and taped to the door,
it hugs the upper part of the spindle hole. Using a
5/16” core cutter from StrongArm, we drill in the
lower right portion of the hole, into the lock case.