ignition key to the “ON” position.
The next screen will give you
several options, (see photo 11).
To simply program the one key
tap “program key.” However
there are several other options as
you can see in the photo. These
include reading how many keys
the vehicle already has pro-
grammed. You can delete a key,
program a remote, or delete a
remote. There is even an op-
tion incase all keys are lost for
the vehicle. We are just going to
program a key.
The next screen tells that it
may take up to 15 minutes for
the system to be configured, (see
photo 12). This is normal so don’t
worry. In this case the immobilizer was reset successfully and
we are ready to program a key,
(see photo 13). The next screen
will tell you to turn the ignition to
the “OFF” position and to insert
a new key and turn it to the “ON”
position, (see photo 14).
When the next screen pops
up you are asked if you would
like to program another key, (see
photo15). By tapping “NO” you
are taken to a screen that will
8. Here you have 90 minutes to
complete the programming.
9. We only need one additional
10. You will see a warning screen
11. Although there are several
options, we will use the program
key at the top.
12. Up to a 15 minute delay can
happen while the system is con-