1. The tag up in the corner identifies
this Bumil as a model ESD-105A.
2. There are many ways into this safe. One is shown
in this photo: unscrew the keylock bezel and drill a
hole here. Insert a wire and tilt up the teeter-totter.
More on this in a bit when we look at the inside. The
beauty of this method is that your repair site will be
completely hidden under the bezel.
3. Another method of entry might involve exposing the
cable hole. It is behind the keypad on this model, and
you can swing the whole thing down. A long “L” wire
might do the trick.
